9,7 x 3,9 x 1,0 cm

12.5 x 78 x 132.5 mm

70 x 13 x 18 mm

99 x 35 x 11 mm

110x45x19 mm

128 x 180 x 30 mm

130 x 74 x 16 mm

130 x 77 x 15 mm

130 x 127 x 9.5 mm

146x82x174 mm

179 x 145 x 41 mm

186.5 x 147 x 42.4 mm

Height 9.5 mm

- Housing
- USB 3.0 cable
- Instructions
- Screw set

- IB-129SSK-B pocket
- 2 keys
- 8 assembly screws

- IB-158SSK-B pocket
- 2 keys
- 8 screws

- IB-245-C31-G
- USB 3.1 cable
- User manual

- 2.5 "HDD Enclosure with integrated USB-C cable (15 cm)
- Plastic housing
- instruction

- Hard disk interface: SATA 2.5" HDD/SSD
- Height of the hard disk: up to 9.5 mm
- HotSwap
- Plug & Play
- Transmission speed: up to 10 Gbit/s
- External data interface: USB 3.1 Gen 2 Type-C
- Power connection: USB power supply

- Internal Interface: M.2 SATA Key-B or Key-B + M
- Connector: USB 3.0 Type-A
- Transmission speed: USB 3.0 to 5 Gbit/s
- Disk size M.2 SSD: 22 x 30/42/60/80 mm
- Chip set: JMS 578
- Power connector: USB power supply

- Supports 2.5" hard drives with SATA III 6 Gb/s/SSD interface
- USB 3.0 5 Gbit/s host interface using uASP
- Protective cover for hard disk
- Supports Windows, Mac
- Plug & Play and Hot Swap

- USB-C 3.1 Gen. 2 interface enables fast data transfer rates up to 10 Gb / s
- LED indicator, Plug & Play function, power supply from USB-C bus, automatic driver installation
- Power: 5V, 900 mA

Hardware requirements: 9.5 mm slim-DVD recess in a laptop

There is no restriction on hard disk capacity

• Backward compatible with USB 3.0/2.0/1.1
• Compliant with USB 3.1 Gen2 specification
• Transfer rate: Up to 10 Gbit/s
• Compliant with UASP (USB Attached SCSI Protocol) Revision 1.0
• Support USB Mass Storage Class, Bulk-Only Transport Specification Revision 1.3
• Contents: USB 3.1 cable (USB-C to USB-C and USB-C to USB-A)

• Compatible with up to 2x M.2 (NGFF) 2230/2242/2260/2280 SATA (B or B+M key) SSD
• Max. Transfer rate: 10 Gbps (USB 3.1)
• Backward compatible with USB 3.0/2.0/1.1 devices
• UASP, Hot Plug, Plug & Play
• With USB-C interface and ON/Off switch